Thursday, March 30, 2017

Smyrna Garage Door Repair: Common Garage Door Issues in Cold Weather

Weather conditions can have an impact your garage door’s performance. This is less than ideal in the coldest seasons, when homeowners want to be able to keep everything closed-up to warm up the house. Unfortunately, garage door issues are very common during cold weather – but preparing for these will enable you to quickly resolve your troubles. Read through our list of commonly-found glitches to ensure your garage door is well-maintained as the temperature drops.

Here is a handy breakdown of some of the problems that Smyrna Garage Door Repair in Smyrna, GA, along with other garage door repair professionals, constantly need to attend to in the coldest months.

1) Creaky or noisy doors

This is probably one of the most common complaints garage door technicians receive during the winter season. As the door is opened or closed, it may become noisier than you are used to – grumbling, complaining, creaking and screeching. While noisy doors can be a sign of damage, in the winter months that’s usually just a sign that it needs a bit more lubrication. You will need to buy some lube and apply it to the necessary parts, including the joints and hinges. If that doesn’t work, then something is amiss: and that will be when you may need to call a garage door repair technician to inspect things further.

2) Problems opening and/or closing the door

Whether that means your door is not opening completely or not closing all the way, the cold weather can cause a few issues that may make it more difficult for your door to operate smoothly. Once again, it could be as simple as oiling up the right parts – but opening and closing issues could actually mean your door has become misaligned. Check if the door is out of balance, and see if the issue can be amended by tapping each side of the door back into position. Be careful, though: if your door is too far out of track, fixing it will be very dangerous. If in doubt, get in touch with an expert.

3) Weather Stripping Failure

If you live somewhere that experiences heavy snow, you will likely encounter this problem. When water freezes near a closed garage door, the weather stripping may get stuck to the ground. In this scenario, the weather stripping will likely tear off as soon as the door is raised – leaving your home with poor insulation and a hefty energy bill. The best way to prevent this? Check that the area in front of your garage door is clear of puddles and snow. Simple as that!

4) Excess grease building up on tracks and rollers

Now, this is something that can easily occur at any given time of the year. In the winter months, though, it can lead to some of the problems we’ve already covered (misaligned rollers being a key example). Actually, finding the right balance between lubrication levels along the tracks and rollers is a bit of a trial and error, but is an important part of your garage door maintenance. Oil up your tracks if needed, but try not to overdo it – apply it in small amounts to reach the right consistency.

5) Breakage because of contracting metal

A very common issue in the colder months. The drop in temperature will cause the door’s metal components, including the springs and screws, to shrink and contract. You can’t prevent this from happening, but you can prevent it from causing any kind of breakage or damage by ensuring all metal parts are well-lubricated. Just remember to keep the oil away from the tracks to avoid the issue we mentioned in the previous point.

And if you do end up with a broken spring – do not try to fix things yourself! Torsion springs especially are quite dangerous to work with without adequate training. Stay on the safe side and call a repairs professional right away.

6) Thickened or hardened grease on your door

The majority of lubricating greases are created to operate under extremely hot temperatures – it’s actually the reason why they work so well with motor engines. Unfortunately, that means the grease doesn’t perform as well when exposed to cold weather conditions. As the temperatures drop, it’s very likely that your garage door’s grease will thicken up and harden. To prevent this from causing any hassles, keep a close eye on your door’s hinges and tracks and make sure to remove any build-up along the way. Old, hardened grease can be removed from your garage door using an applicable solvent. Once you’ve cleaned up the build-up, replace it with a silicone-based oil – this will last you through the winter months much better than your standard oils.

Throughout this list we have identified certain times when you may need to call on a repairs professional. If you need to find one in your area, make sure to ask people you trust for recommendations and keep 2-3 business names handy. Call these and inquire about their services, including minimum callout charges and product warranties. Never hire a company that has no verifiable address, and don’t pay full price upfront for any repairs job (partial deposits are legitimate, though). If you have time to do a bit of background checking on your selected business, that’s even better – otherwise, just stick to word-of-mouth recommendations.

Those of you who live in Smyrna, Georgia, are more than welcome to contact us if you experience any of the cold weather issues we mentioned in this post. Smyrna Garage Door Repair is a locally owned and operated business, with all the certifications, training and tools needed to conduct safe and reliable repairs. Call us to consult with our experts, and we will provide you with a full price quote for any requests you may have for our team. In emergencies, our phone lines are operating 24/7.

Whether you live in Smyrna, GA, or elsewhere, we hope that this blog post has clarified some of the issues you may experience with your garage door during the winter months. Remember to stay on top of maintenance to ensure that everything keeps running smoothly all year round.




Article source here: Smyrna Garage Door Repair: Common Garage Door Issues in Cold Weather

Monday, March 6, 2017

Common Garage Door Closure

Smyrna Sectional Panel Replacement

A door closer helps to latch a door in a controlled manner, keeping it from slamming and making a lot of noise or loud sound. This is what happens when a door is closing.  The equipment used for door closers have been around for years. In fact, some of these same parts are still being sold and installed in newer doors today, such as, hinges, weights and springs. A door closer can come in various applications, sizes, shapes and configurations. They can be installed inside the header above the door, mounted underneath the floor under the door or surface mounted on the face of the door. Each way has its own benefits and disadvantages. Consulting with a reputable and reliable garage door service, such as, Smyrna Garage Door Repair will enable you to find out more about the advantage and disadvantages. Note that many architects install concealed door closers for aesthetic purposes.

 

Types of Door Closures

 

There are at least three common problems that cause door closure issues, stack pressure, regulations and temporary door distortion. Stack pressure is the movement of air contained inside a hermetically sealed property. The pressure develops inside the building when the air moves through the HVAC ducts and intakes. The pressure can be experienced when someone is attempting to open an exterior door. This is because of the stack pressure that the door will not close. If the buildings HVAC system is not on, this problem will not exist.

 

Smyrna Loading Dock Garage Doors

Since every area has different regulations, ordinances and codes, they may experience different types of problems with door closures. Trying to find a resolution that will be cost effective can be challenging. To avoid the costly expense of a power door operator manufacturers have designed unique door closers. One of the uniquely designed closures is a cam closure. The action of a cam closer is felt when the door is closing shut. In most regular surface mount door closers, the greatest amount of force is generally felt at the opening of the door. With the cam door closer, the user if given more power, which enables the door to latch and close the door more efficiently.

 

The temporary door distortion happens to a hollow exterior door that is typically located on the side of buildings where the sun hits it. When the sun hits the building it heats up the door. This means that the door can become distorted or warped out of shape. This will create a problem with the door closing normally.

 

What’s Most Important

 

When considering the right type of door closer, you should know that the closer itself isn’t the most important part. Your closer will not work properly if the hinges or the door are not correctly lubricated. If everything is lubricated and tight, it will certainly make it possible for the door closer to close smoothly and latch correctly.

Types of Closers

The most common closers are surface-mounted closers, concealed closers and floor closures. Surface-Mounted  closerscome with adjustable size surface-mounted door closers with spring force that can be adjusted to various sizes. This eliminates the need to have different sized closers. The adjustable closers are different depending on the manufacturer. A surface-mounted door closer can be installed on either side of the door opening on a swing door or out swing door.

 

Surface-Mounted Closer Installation:

 

  • Parallel Arm Mounting

The closer is placed on the face of the door and the shoe is mounted into the jamb. This places the arm parallel to the door opening. This is how a surface-mounted closer is installed on a swing door. There is less damage that occurs with it being installed parallel to the door face than if it were perpendicular to the arm.

 

  • Top Jamb Mounting

The closer is mounted onto the jam and the shoe is mounted on the door face. This places the arm in a perpendicular position toward the opening. This process is applied to swing doors with closer on the inside of the door.

 

  • Regular Arm Mounting

This is when the closer is located on the face of the door and the shoe is mounted onto the jamb. In this case, the opening of the door is perpendicular to the arm. Again this application applied to swing doors with interior closer.

 

  • Track Arm Mounting

In this process the closer is mounted on the face of your door and the track arm is placed onto the jamb. This can be performed on both swing doors and out swing doors with the closer mounted on the interior side of the door.

 

Concealed Closers

 

This type of closer has various benefits to a surface-mounted closer since it functions as part of the attached swinging mechanisms, which are on the top or bottom of the door. The door has a point of rotation that will safely and effectively, carry the weight of the doors header or pivot it. With a surface-mounted door closer it requires an added component that controls the way the door opens and closes. In this case, the door hinges carry the weight. The concealed door closer needs more energy to operate than the surface-mounted door.

Floor Closers

Floor closers can accommodate doors that weigh more than 1000 pounds. On the other hand a shallow body closer can only accommodate a maximum of 250 pounds. On the heavier doors, intermediate load bearing pivots are applied. Lighter doors have non load-bearing intermediate pivots.

Why You Care

 

Most people don’t care about the door closers that are installed. If you are having a building built for your business, you might want to know what some of the various components of your buildings doors might consist of. In any case, while you may not fully be aware off what these various factors are and how they affect your doors, it is a good idea to know a little something about them simply for the purpose of making a well-informed decision. Your local garage door service can assist you in further understanding the types of closers used and why.




Article source here: Common Garage Door Closure